Enquire Now
Category

Videos

Vision Luxo range of industrial illuminated bench magnifiers

Vision Luxo industrial bench magnifier range

By | Videos

Vision Engineering’s collaboration with Luxo Corporation, provides a range of illuminated industrial bench magnifiers offering outstanding performance for a range of manufacturing, assembly and inspection tasks.

These quality bench magnifiers provide perfect balance and flexibility for efficient working, always ensuring they stay in the right position without drifting.

Find out more

Camβ (CamBeta) - a new digital inspection magnifier for portable inspection and documentation

Camβ (CamBeta) – digital handheld magnifier

By | Videos

Camβ (CamBeta) – a new digital inspection magnifier for portable inspection and documentation.
This new handheld inspection device is suitable for a wide range of applications and provides magnification up to 20x, stores up to 20,000 images and uses grids and cursors for X & Y dimensioning, simply where you want, when you want..

Find out more

360 degree rotating viewer for Lynx EVO and EVO Cam II microscopes

360° rotating viewer for Lynx EVO and EVO Cam II microscopes

By | Videos

360° rotating viewer for Lynx EVO stereo microscopes and EVO Cam II digital microscopes.

Find hidden details and features in many applications. The ultimate microscope inspection accessory permits a 360° full rotating view of an object (at an angle of 34 °).

The 360° rotation provides enhanced observation for many applications, including electronics (PCB solder joints, holes, pillars and thread forms), mechanical, medical and plastics components. The operator can easily switch from a 360° rotating view to a conventional direct view for ultimate comfort.

Introducing Swift PRO non-contact measuring systems

Introducing Swift PRO non-contact measuring systems

By | Videos

A simple 2 minute introduction to Swift PRO non-contact measuring systems in action.

Swift PRO is the only measuring system that combines video edge detection with an ergonomic measuring microscope so you can measure both routine and difficult to view features easily with the same system.

Video measurement is ideal for measuring components with clearly defined edges. Optical measurement is ideal for features difficult to view, such as clear or coloured plastics or annular features on metal parts

Find out more

EVO Cam digital microscope to power your productivity

EVO Cam digital microscope to power your productivity

By | Videos

EVO Cam is a full-HD (1080p / 60fps) high performance digital microscope optimised for quality control, testing, inspection and documentation, simplifying precision magnification tasks allowing you to focus on the details.

Full high definition live video imaging (1080p/60fps) brings to life a macroscopic world in stunning detail, with magnification options up to 300x and full auto focus to ensure ultra-sharp imaging at all times. Capture full-HD images at the touch of a button (with or without a PC).

Stunning 3D stereo imaging with new Lynx EVO ergonomic stereo microscope

Stunning 3D stereo imaging with NEW Lynx EVO ergonomic stereo microscope

By | Videos

Lynx EVO is a high productivity eyepiece-less stereo microscope with unrivalled ergonomics and advanced optics for fast and accurate inspection (up to 120x magnification) for a wide range of applications.

This introduction video highlights why microscope ergonomics is so important to the overall productivity of your business.

Using patented Lynx Dynascope® optical technology, Lynx EVO is the latest generation of eyepiece-less stereo microscopes from Vision Engineering.

Lynx EVO builds on the reputation of the original Lynx microscopes, trusted by the World’s leading companies.

  • Stunning 3D stereo imaging in complete comfort
  • Modular design for flexible solutions
  • Integrated HD image capture options
  • Software for documentation and on-screen dimensional measurement
  • 360 rotating viewer for enhanced observations

Vision Engineering are manufacturers of world leading ergonomic microscopes and measuring microscopes.

How to create a measurement programme with Xpress

By | Videos

Xpress utilises the power of high resolution field of view (FOV) measurement to provide ultra-fast, high accuracy, 2D measurements of small parts.

Creating a measurement programme takes less than 2 minutes, allowing you to measure single, or multiple parts in seconds.

With Xpress, there is no need to position the part, or even adjust the focus — just place the part ANYWHERE within the field of view, and then run the programme. Hundreds of measurements are taken (within the field of view) in seconds. Xpress is ideal for customers who require the fastest, simplest way to accurately measure their component parts.

‘Field of view’ non-contact measurement technology is ideally suited for fast measurement of small flat flexible parts, such as gaskets, washers, plastic and rubber extrusions; other common applications include O-rings, circlips, pressed / stamped parts, cutting tools.

Please note: The programming in this video occurs in REAL TIME. There is no editing to speed up the process.

Profile measurement of multiple parts using Xpress FOV system

Profile measurement of multiple parts

By | Videos

Xpress utilises the power of high resolution field of view (FOV) measurement to provide high accuracy, 2D X/Y measurements of multiple parts; typical measurement routines are completed in seconds — all at the touch of a button.

Multiple parts? No problem. Simply place your parts ANYWHERE in the field of view. No need to align. No need to focus. Just press RUN.

Intelligent software eliminates the part alignment task and automatically locates, recognises and orientates the parts being measured.

Ultimate simplicity continues with clear Go, No Go tolerance results, with full reporting capabilities for further investigation, if required.

‘Field of view’ non-contact measurement technology is ideally suited for fast measurement of small flat flexible parts, such as gaskets, washers, plastic and rubber extrusions; other common applications include O-rings, circlips, pressed / stamped parts, cutting tools.

Please note: The measurements in this video occur in REAL TIME. There is no editing to speed up the measurements.

simple accurate 2d measurement with Swift video

Simple, accurate 2D measurement with Swift

By | Videos

Designed as a powerful, yet simple video measuring system, Swift provides fast and accurate measurement of both routine and complex precision component parts, suitable for shop-floor, manufacturing and quality control inspection applications.

Swift is the perfect starting point to upgrade your measurement and inspection capabilities and improve your quality control routines.

  • Small footprint, big impact, low investment
  • Industry-leading software provides ultimate simplicity
  • Modular construction allows future upgrade to Swift Duo

The perfect way to upgrade your measurement & inspection capabilities.

Dual optical and video measuring system Swift Duo

Two measurement systems in one! Advance your capabilities with Swift Duo

By | Videos

Swift Duo – Two measurement systems in one!

By integrating an ergonomic measuring microscope with Swift, Vision Engineering has created Swift Duo, a video measuring system capable of measuring all your precision components, not just the easy ones!

Swift-Duo provides fast and accurate measurement of both routine and complex precision component parts, suitable for shop-floor and manufacturing inspection applications. No need to switch systems. Both video and optical measurements occur seamlessly, in the same routine, without any delays.

  • Ideal for measuring 2D features of small, intricate parts
  • Seamlessly switch between video and microscope measurement
  • Patented optical ergonomic microscope offers high resolution surface inspection
  • Low capital investment, high accuracy measurement system
  • Industry-leading measurement software
  • Ultimate simplicity for reduced training needs